Philips DVDR 725H/05 Operating Instructions Manual page 32

This function changes the order of the TV channels stored in your
DVD recorder to match the order on the TV.
This only works if the DVD recorder ( EXT1 TO TV-I/O
and the TV
•) Switch on the TV, and if necessary, select the programme number
for the DVD recorder.
•) Switch on the DVD recorder.
1 Press the BROWSER HDD
A
MENU button on the remote control.
P
The 'SYSTEM MENU' appears.
2 Select '
' using B O
3 Press C
M
to select '
4 Select the line '
C
M
.
P
A message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
If the 'Time Shift Buffer ' contains important recordings, save
them with the REC/OTR n
chapter 'The Time Shift Buffer'.
5 Select '
' with D K
and confirm with OK
If the message window was closed, confirm the line with
C M
again.
6 Select line '
' with B
the C
M
button.
7 Confirm the message on the screen with OK
P
' ' will appear in the DVD recorder display.
N
socket)
.
H
and then the SYSTEM
.
'.
' using B O
and confirm with
1
button first. Refer to the
L
.
or A
O I
and confirm with
L
.
8 Select programme number '1'
a
b
M
AUX-I/O
9 Confirm with OK
L
on the DVD recorder remote control.
P
' ' will appear in the display.
P
The DVD recorder compares the TV channels on the TV and
the DVD recorder.
If the DVD recorder finds the same TV channel as on the TV
it stores it at 'P01'.
a
b
b
b
0 Wait until for example '
A Select the next programme number
B Confirm with OK
L
on the DVD recorder remote control.
If you confirmed the wrong TV channel, you can delete the
last allocation with D
C Repeat steps
0 B
to until you have assigned all the TV
channels from your TV.
À To end, press SYSTEM MENU
a
b
STANDBY m 2
b
STANDBY m 2
.
EXT2
' appears in the display.
, e.g. '2'.
K
.
A
.