Philips DVDR 725H/05 Operating Instructions Manual page 29

A Switch the receiver on and select programme number 02 on the
receiver or using its remote control.
a
L
OK
B Read the information on the screen carefully.
L
Confirm with OK
.
P
The DVD recorder will now attempt to use the G-Link
connection on the external receiver to select a different
programme number (e.g.12). This programme number
depends on your external receiver.
C Has the external receiver been switched to the programme
number displayed on the screen?
If this is the case, select '
If no switching has taken place, select '
a
L
OK
L
OK
'.
'.
À Your external receiver has now been installed.
Á Press OK
L
to return to the setup overview. Check the settings
shown on the screen.
If the settings are not correct, choose the line in which you
want to change the settings and confirm with OK
 Press the green function button
If you want to view a demonstration of the GUIDE Plus+
system select '
L
OK .
If you start the demo, programmed recordings may be deleted.
If you do not want to see the demonstration of the GUIDE
Plus+ ® system, end using GUIDE/TV
a
L
.
E
to leave the screen.
®
' with B O
and confirm with
J
.