Philips DVDR 725H/05 Operating Instructions Manual page 108

PROBLEM/HINTS
EXT2
AUX-I/O
M
SOLUTION
b
1
Insert the DVD+RW you want to prepare.
B
2
Press DISC MENU
Select the first title using A
3
Press A I
4
.
Press C
5 M
and select '
L
OK .
6 L
Press OK to start the process.
7
When the process is complete, the index screen appears.
b
1
Clean the disc
2 Open the disc tray with OPEN/CLOSE J
3
Hold down the red function button
prepared for erasing.
4
Start recording as with an empty disc.
b
1
Make sure that the surface of the disc is clean.
Open the disc tray with OPEN/CLOSE J
2
.
3
Hold down 5 on the remote control until the tray closes. The disc will be read ('
appears on the display) and the DVD recorder will start the repair process. This may take up
to four times as much time as the recording, in which the error occurred.
4
If the disc is recovered, the index screen will appear.
Please observe the following:
The recovering procedure is successfully only if there was a previous recording on the disc.
Error during recording: The title may be missing.
Error while changing the title/index picture: The original title/index picture may be visible.
Error while finalising: The disc appears not to have been finalised.
b
1 Open the disc tray with OPEN/CLOSE J
.
2
Hold down 4 on the remote control until the tray closes.
' ' appears in the display. Finalising begins. This may take up to three minutes.
3
If finalising has been successful, the index screen will appear.
b
1
Press BROWSER HDD
2 ' with B
Select '
Press C
3 M
to select '
' (second menu page) using B
4
Select '
' using C
5 M
Select '
6
End with SYSTEM MENU
6
EDIT
to call up the index screen.
or the STOP h
I N
button.
' using A
3
. Insert the disc but do not close the tray.
D
on the remote control until the tray closes. The disc is
3
. Insert the defect DVD+R but
3
. Insert the defect DVD+R but
H
and then SYSTEM MENU
O
.
'.
O
.
A
.
or B
I O
and confirm with
A
.
.
'