Remote Control Information/Unit Care - Panasonic Diga DMR-EX98VEB Operating Instructions Manual

Hide thumbs Also See for Diga DMR-EX98VEB:
Table of Contents

Advertisement

Remote Control Information/Unit Care

Remote Control Information
About batteries
Insert so the poles ( 4 and 3 ) match those in the remote control.
Do not use rechargeable type batteries.
R6/LR6, AA
Do not mix old and new batteries.
Do not use different types at the same time.
Do not heat or expose to flame.
Do not leave the batteries in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Do not take apart or short circuit.
Do not attempt to recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Unit Care
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
Do not place the unit on amplifiers
or equipment that may become hot.
The heat can damage the unit.
The unit should not be installed
or operated near large magnets
or electromagnetic devices. Such
devices can damage pre-recorded
VHS recordings.
Do not place any heavy objects on top of the unit.
The unit should not be mounted in a vertical position. It's designed
to operate in the horizontal position.
Before moving the unit, ensure the disc tray and cassette
compartment are empty.
Failure to do so will risk severely damaging the disc and the unit.
Select a position with good ventilation when installing the unit. Do
not block the cooling fan on the rear of the unit.
Cautions about condensation
Condensation can cause unreliable playback of VHS recordings.
Condensation may form in the following cases,
The unit is brought from cold surroundings into a well-heated room.
The unit is suddenly brought from cool surroundings, such as an
air-conditioned room or car, to a place which is hot and humid.
During rainy seasons.
In any of the above-mentioned conditions, do not operate the unit for
at least 2 hours. The unit is not equipped with a moisture sensor.
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited
material due to a problem with the unit or recordable media, and accepts no responsibility and offers no
compensation for any subsequent damage caused by such loss.
Examples of causes of such losses are
A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company.
A disc used as described above and then played again in this unit.
A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.
Using the remote control
Aim at the sensor, avoiding obstacles, up to a maximum range of 7 m
directly in front of the unit.
Maintenance
To clean this unit
Wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
DO NOT
Before using chemically treated cloth, carefully read the instructions
that came with the cloth.
To clean the DVD lens
Dust and dirt may adhere to the unit's lens over time, making it
impossible to record or play discs.
Use the DVD lens cleaner about once every year, depending on
frequency of use and the operating environment. Carefully read the
lens cleaner's instructions before use.
DVD lens cleaner: RP-CL720E
To clean the video heads
Dirt on the video heads can cause poor recording and play.
If the picture does not improve, use an optional head-cleaning cassette.
If the problem persists, seek advice from a qualified service person.
Head-cleaning cassette: NV-TCL30PT
Some optional accessories may not be available in some countries.
Remote control signal sensor
20
20
30
30
7
RQT9089

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents