Connecting To A Television With Audio/Video Cable (Not Included); Adding An Amplifer Or Receiver - Panasonic Diga DMR-EX99VEB Operating Instructions Manual

Connecting to a Television with Audio/
Video Cable (not included)
≥ You can connect this unit to a TV using the audio/video
(AV) cable, instead of the HDMI cable or 21-pin Scart
cable ( 10, 11, 86).
≥ Using a Scart or HDMI cable gives a higher quality
picture than this connection.
≥ Connect to terminals of the same colour.
TV
AUDIO IN VIDEO
R L IN
This unit
R L
AUDIO
VIDEO
OUT

Adding an Amplifer or Receiver

Use these connections to play sound through speakers
connected to an amplifier or system component.
Using an Audio Cable (not included)
It is possible to output 2-channel stereo sound.
≥ Connect to terminals of the same colour.
Amplifier
or
System Component
Using an Optical Digital Audio Cable (not included)
It is possible to output multi-channel surround sound on
DVD-Video.
Amplifier or System Component
OPTICAL IN
Insert fully with this side up.
Do not bend cable sharply.
OPTICAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
≥ Connect an amplifier or system component with a built-
in Dolby Digital, DTS or MPEG decoder.
≥ Adjust settings in "Digital Audio Output" as needed,
depending on other connections and the amplifer or
receiver ( 81).
Notes
≥When this unit is connected to an amplifier with an optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
"Digital Audio Output" to "Optical Only" in the Setup menu (
In this case audio is only output from the amplifier not the television.
≥You cannot use DTS Digital Surround decoders not meant for DVD.
≥Before purchasing an optical digital audio cable, check the terminal
shape of the equipment to be connected.
AUDIO IN
R L
This unit
R AUDIO L
OUT
This unit
82).
87
VQT2J45