Table of Contents
Advertisement
note
You can also press the RGB1,
RGB2, and MAIN buttons
on the document camera to
switch to a different video
source.
Switching Between Picture Sources
If you have an external video source connected to the document
camera,
such as a laptop or desktop
computer,
you can switch between
the video source and
the
camera.
•
If
you've
connected a computer to the RGB1 INPUT port on
the
document camera, press the RGB1 button on
the
remote control.
•
If you've connected another computer to the RGB2 INPUT port,
press the RGB2 button to access that
source.
•
Press the Main button to switch back to the document camera.
Select
the image
source
1"
21'
3/1
---
PAUSE
4f-
5'7
- - -
~
61(
7.J-
8~
---
.RESE.II.MAG.
POSIINEGA
COLORlB&W
UPPER
LAMP
BASE
- ---
-{
MAIN
-INPUT-
RGBl -
RGB2
- --
.oOM.11.oCU.
Ii ••
-Jr.
1
--IRIS
--
Adjusting the Lighting
If you are presenting printed material or three-dimensional
objects,
the two upper lamps provide ample light. If the ambient lighting in
the room is sufficient, however, you may obtain a better
image
with
the upper lamps
off.
In
addition,
you may want to turn the upper lamps off and the
base
lamp on if you're projecting film or slides.
Using the
Document
Camera
Advertisement
Table of Contents
