Switching Between Color And Black And White - Epson ELPDC05 User Manual

Switching between Color and Black and White
Sometimes you may want to switch to a black and white image. For
example, a black and white display allows you to project text without
color interference. resulting in a sharper image.
To switch from color to black and white, press the COLOR/B&W
button on the remote control. Press it again when you want to switch
back to color.
Switches between
color and black and
white display
,~
21' 3"
---
PAUSE
4<-
5->
-- -
~
6~
7"
8~
---
.RES.I! .MAG.]
POSltEGA CClOOlB&W
UPPER
LAMP
BASE
----
MAIN
--INPUT --
RGB1 -"" RGB2
- --
_ZO~_II_OCU_
___ lll.1
--IRIS--
Freezing the Image
During a presentation, it may be necessary to change the material you
are displaying. Press the PAUSE button before switching your
material. This freezes the image on screen. allowing you to change
your material. When you are ready to display the next item, press the
Pause button again.
Freezes the image
,~
21'
3"
---
..=.
4<- 5->
-
- -
~
61< H
8~
---
.RES.II.MAG.
POSl/t>EGA
caCP!d&W
UPPER
lAMP
BASE
--- -
MAIN
-INPUT~
RGBl -"" RGB2
- --
_ZO~_II_OCU_
---lll.1
-- IRIS--
note
The pause feature only works
when the document camera is
in the MAIl\! display mode. It
does not work when the
document camera is in the
RGB1 orRGB2 display
modes.
Using
the Document Camera