Switching Between Picture Sources; Adjusting The Lighting - Epson ELPDC05 User Manual

note
You can also press the
RGB1
, and buttons
RGB2 MAIN
on the document camera to
switch to a different video
source.
Using the Document Camera
24

Switching Between Picture Sources

If you have an external video source connected to the document
camera, such as a laptop or desktop computer, you can switch between
,
the video source and the camera.
If you've connected a computer to the
document camera, press the
If you've connected another computer to the
press the
RGB2
Press the
Main
Select the image
source

Adjusting the Lighting

If you are presenting printed material or three-dimensional objects,
the two upper lamps provide ample light. If the ambient lighting in
the room is sufficient, however, you may obtain a better image with
the upper lamps off.
In addition, you may want to turn the upper lamps off and the base
lamp on if you're projecting film or slides.
button on the remote control.
RGB1
button to access that source.
button to switch back to the document camera.
PAUSE
2x
PRESET IMAGE
SET CALL SET
POSI/NEGA COLOR/B&W
UPPER
INPUT
MAIN RGB1
ZOOM
FOCUS
TELE WIDE
NEAR
NORMAL OPEN CLOSE
IRIS
port on the
RGB1 INPUT
port,
RGB2 INPUT
CALL
LAMP
BASE
RGB2
FAR
AF