Table of Contents
Advertisement
note
Camera settings remain in
memory
even when you turn
the
document
camera off.
However, saved images are
deleted
when the camera is
turned
off.
Assign a
number
to
saved
settings
and images
1<
2~
3.
- - -
fl\USE
4~
5~
-- -
~
6<
H
6>
---
{
I.ffiESE.lr
_~Ii
}-
FOSIiJIEGR
a:t(RIB&W
UPPER
lAMP
BASE
-- --
!.lAIN
-iNPUT--
RGBt
~
RGB2
- --
.ZOOM.llil
OOJ
•
Ii ••
ell-
--IRIS--
Press
to save
and recall
settings
Press
to
save
and recall
images
Saving Settings
and
Images
You can save up to eight groups of document camera settings for later
use. That way, if you want to present the same type of materials (for
example, negative film), you can
quickly
recall your settings with a
simple push of a
button.
You can also recall up to eight individual images captured by the
document
camera.
Saving and Recalling Camera Settings
To save your settings, press the PRESET SET button on
the remote
control, then press one of the numbered buttons
between
1 and 8.
The message
PRESET
x
WRITE appears on
the
screen (where
x
is
the
number assigned to the group).
To recall a group of saved
settings,
press the PRESET CALL button on
the remote control, then press the number of the group you
want
to
use. The message MOVE
x
appears (where
x
is the number of the
group) and
the
appearance of the screen changes to show your
settings.
Saving and Recalling Images
To save a
copy
of
the
projected
image,
press IMAGE SET on the
remote control, then press one of the numbered buttons between 1
and
8.
The message MEMORY STATUS
appears,
followed by
IMAGE xWRITE, where xis
the
number assigned to the image.
To recall a saved image, press IMAGE CALL on
the
remote control,
then
the
number of the image you want to display. The saved image
appears
on
the screen.
Using the Document Camera
Advertisement
Table of Contents
