Epson DC-11 Document Camera (ELPDC11)
Follow these instructions to display pages from books, documents, and
three-dimensional objects. To use other features, see the User's Guide on the
Document CD-ROM. It provides instructions for using the microscope adapter,
capturing still images, and using the included software.
Before using the product, make sure you read the safety instructions in the
User's Guide on the Document CD-ROM.
Setting Up the Product
Raise the camera arm.
Connect your projector. Use a VGA cable (included) or a composite video
cable (check your projector for available ports).
Composite video cable
Connect the power adapter.
power button to turn on the document camera.
Turn on your projector. Then select the source (port) on the projector
that lets you display the camera image. On the document camera, press
Source button, if necessary.
Using the Product
Place your document on the table under the camera head.
Slide the lamp switch to illuminate the document.
Turn the dial on the camera head to rotate the image on the screen.
Press the Focus button. Your document is automatically focused.
To zoom in on part of the image, press the Zoom
You can also use the remote control to adjust the image.
When you're done using the product, turn it off and lower the camera arm as
shown. It cannot be folded flat.
To avoid damage, do not try to press the arm flat or fold