Ift-Rc400 Intellifire™ Touch Remote Control User Guide - Heat & Glo ST-36TR-IFT Owner's Manual

C. IFT-RC400 IntelliFire™ Touch Remote Control User Guide
The Screen, Functions and Indicators sections of the IFT-RC400 User Guide are included in this section for reference. Fre-
quently Asked Questions and Troubleshooting are discussed in Section 5.B and Section 5.C.
Introduction
This user guide serves as a quick reference to the screen,
functions and indicators on your IntelliFire™ Touch
Remote control.
SCREEN
INDICATOR BAR
ROOM TEMPERATURE
FUNCTIONS
DYNAMIC ICONS
IFT-RC400
IntelliFire™ Touch Remote Control
DISPLAY
SELECTION
INDEX
Heat & Glo • ST-36TR-IFT, PIER-36TR-IFT Owner's Manual • 2482-981 Rev. B • 3/17
User Guide
Turn Flame On/Off
Toggle this function to turn ON or OFF your appliance.
Thermostat
You can set and maintain your desired room temperature
with the thermostat function. This function automatically
adjusts your appliance to maintain the desired set
temperature (ST).
To achieve the most accurate thermostat function, place
your remote control in the same general space that
you want to have the temperature controlled by your
appliance. For
control away from direct radiant heat from the appliance,
adjacent windows and doors, HVAC vents, and direct
sunlight.
To use the thermostat function, access the main menu
screen on your remote, and select thermostat. Next,
simply select your desired set temperature by using the
actual room temperature (RT), measured by your remote
control, will be displayed in the upper right corner of the
main menu screen. To turn the thermostat function off,
simply select thermostat on the main menu screen and
select OFF.
If the RT cools to more than 3 °F lower than the ST for
at least 2 minutes, then your appliance will automatically
turn ON. The thermostat function will automatically adjust
height will automatically adjust down. If the RT rises 2 °F
above the ST for at least 2 minutes, then your appliance
will automatically turn OFF.
During thermostat use, you will not be able to set your
between the RT and ST.
Flame Height
ambiance and control the heat output.
start.
FUNCTIONS
best results, keep your remote
29