Table of Contents
Advertisement
Drawing file
About the drawings in the drawing file
Relevant drawings related to the installation and/or maintenance of the SN90 are
provided for information purposes only.
Note
These drawings are for information and planning purposes only. The drawings are not to
scale. Unless otherwise specified, all measurements are in millimeter (mm). The original
installation drawings are available in PDF and/or AutoCad's DWG format. The original
drawings can be downloaded from our website.
•
http://www.simrad.com/sn90
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures.
If required, all documents provided by the shipyard for the physical installation of the
SN90 must be approved by the vessel's national registry and corresponding maritime
authority and/or classification society. Such approval must be obtained before the
installation can begin. The shipowner and shipyard doing the installation are responsible
for obtaining and paying for such approval.
219
381298/C
Advertisement
Table of Contents
