Philips DVDR985 Technical Training Manual page 18

40402 - NVRAM error log is invalid
40403 - Front panel failed
40701 - NVRAM error log reset; I2C failed
40900 - Region code Change counter is reset
40901 - NVRAM region code reset; I2C failed
41001 - NVRAM Store DV Unique ID; I2C failed
41002 - NVRAM Store DV Unique ID; Invalid
input
50007 - Execution of the command on the
Analog Board failed.
50008 - The front panel could not be accessed
by the Analog Board.
50009 - The echo from the front panel processor
was not correct.
50100 - Front panel version: FP version
50102 - Execution of the command on the
Analog Board failed.
50103 - The front panel could not be accessed
by the Analog Board.
50204 - Execution of the command on the
Analog Board failed.
50205 - The front panel could not be accessed
by the Analog Board.
50206 - The front panel did not show a starburst.
50207 - The user skipped the FP-which pattern
test.
50208 - The user returned an unknown confirma-
tion: confirmation
50209 - The front panel did not show horizontal
segments.
50210 - The front panel did not show vertical
segments.
50304 - Execution of the command on the
Analog Board failed.
50305 - The front panel could not be accessed
by the Analog Board.
50306 - The front panel did not light all labels.
50307 - The user skipped the rest of the FP-
label test.
50308 - The user returned an unknown confirma-
tion: confirmation
50404 - Execution of the command on the
Analog Board failed.
50405 - The front panel could not be accessed
by the Analog Board.
50406 - The LED's could not be turned on.
50407 - The user skipped the rest of the FP-LED
test.
50408 - The user returned an unknown confirma-
tion: confirmation
50502 - Front panel Keyboard; test failed
50503 - Front panel Keyboard; test aborted
50504 - Front panel Keyboard; not all keys were
pressed
50505 - Front panel keyboard I2C connection
failed
50506 - Unable to get slash version
50602 - Front panel Remote control; test failed
50603 - Front panel Remote control; test aborted
50604 - Front panel remote control; can not
access FP
17