Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Automatic Programming - Philips MCD119/05 User Manual

Tuning to radio stations

1
Press SOURCE on the set or TUNER on the
remote repeatedly until the desired waveband
(FM) is displayed.
2
Press and hold TUNING 22/33 and release
the button.
➜
The radio automatically tunes to a station
with sufficient reception.
3
Repeat Step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press TUNING
22/33 briefly and repeatedly until you have
found optimal reception.

Programming radio stations

You can store up to a total of 20 radio stations
in the memory.

Automatic programming

Press PROG/ANGLE on the remote for
more than three seconds to activate
programming.
➜
All available stations are programmed.
➜ AUTO is displayed and available stations are
programmed in order of waveband.

Radio Reception

Manual programming

1
Tune to your desired station (refer to "Tuning to
radio stations").
2
Press PROG/ANGLE to activate
programming.
➜
PROG flashes on the display.
3
Press í/ë to allocate a number from 1 to 20
to this station.
4
Press PROG/ANGLE again to confirm the
setting.
➜
PROG disappears.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

●
Press í/ë until the desired preset station is
displayed.
2;