Radio Reception
Tuning to radio stations
1
Press SOURCE on the set or TUNER on the
remote repeatedly until the desired waveband
(FM or MW) is displayed.
2
Press and hold TUNING 22/33 and release
the button.
➜
The radio automatically tunes to a station
with sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press TUNING
22/33 briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to a total of 20 radio stations
for each band in the memory.
Automatic programming
Press PROGRAM for more than three
seconds to activate programming.
➜
All available stations are programmed.
➜
AUTO is displayed and available stations are
programmed in order of waveband.
32
Manual programming
1
Tune to your desired station (refer to "Tuning to
radio stations").
2
Press PROGRAM to activate programming.
➜
PROG flashes on the display.
3
Press PRESETí/ë to allocate a number
from 1 to 20 to this station.
4
Press PROGRAM again to confirm the setting.
➜
PROG disappears.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press PRESETí/ë until the desired preset
station is displayed.