BASIC OPERATION
11. Source Select (Input mode selection)
• You can select the input source by pressing the
input switch of the interactive monitor.
Tips
• The input mode is automatically changed to
mode which is actively used by an external source.
12. Touch Screen (On/Off) Button
• Turns on/off the touch screen.
13. Volume/Brightness Button
• You can select the Volume or Brightness by
pressing the Volume/Brightness switch of the
interactive monitor.
14-15. Up/Down +/- (Volume/Brightness
adjustment)
• Pressing Up(+) or Down(-) buttons display the
VOLUME or BRIGHT menu.
Use these buttons to adjust the volume of the sound
or adjust the brightness.
If you do not press any buttons for about 3 seconds,
the VOLUME or BRIGHT menu automatically
disappears.
16-17. Brightness +/- (Brightness adjustment)
• Pressing Brightness Up(+) or Brightness Down(-)
buttons display the BRIGHT menu.
Use these buttons to adjust the brightness.
If you do not press any buttons for about 3
seconds, the BRIGHT menu automatically
disappears.
18-19. Vol +/- (Volume adjustment)
• Pressing Volume Up(+) or Volume Down(-)
buttons display the VOLUME menu.
Use these buttons to adjust the volume of the
sound.
If you do not press any buttons for about 3
seconds, the VOLUME menu automatically
disappears.
20. Touch Function
• Turns On/Off the touch screen.
21. Mute
• Turns off the volume temporarily.
• Press the MUTE button again to turn the sound
back to the previous level.
22. Display On/Off
• Turns on/off the monitor.
23. Information
• Displays the mode which is displayed by monitor at
that time.
24. Screen Freeze
Tips
• Display On/Off button only turns on/off the monitor
so system will not enter standby mode.
However, System On/Off turns on/off the system so
system will enter standby mode.
Warning!
•Remote Control may not work properly if there
would be any object under the interactive monitor
closer than 100cm.
17