P3 M/B Jumper Setting - EBN Technology POS70-2EB-370 User Manual

DCD or DTR Select of COM6 Setting
JP4: DCD/DTR Setting
JP4 Description
1-2 DCD
2-3 DTR
Pentium 4/Mobile P4/Mobile P4-M Select
JP7: Pentium 4/Mobile P4/Mobile Pentium 4-M Select
JP7 Description
1-2 Pentium 4
2-3 Mobile Celeron/P4-M
LCD Power setting
JP8: This jumper is for the setting of LCD panel voltage.
JP8 Description
1-2 +3.3V
3-4 +5V

5.2 P3 M/B Jumper Setting

(POS70-2EB-370, POS70-5EB-370)
Compact Flash Card Master/Slave Mode Setting
JP1: Master/Slave Mode Setting
JP1 Description
OPEN SLAVE
SHORT MASTER
LCD Power setting
JP2: This jumper is for the setting of LCD panel voltage.
JP2 Description
2-4 +3.3V
4-6 +5V
42/47 Version 1.2