Table of Contents
Advertisement
O
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the buttons on the top of the projector to
navigate and make changes to the OSD. The following illustration shows the corresponding
buttons on the projector.
1. To enter the OSD, press the
MENU button.
2. There are five menus. Press
the cursor ◄► button to move
through the menus.
3. Press the cursor ▲▼ button to
move up and down in a menu.
4. Press ◄► to change values for
settings.
5. Press MENU to close the OSD
or leave a submenu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the
Horizontal/Vertical Position items in the Computer menu can only be modified when
connected to a PC. Items that are not available cannot be accessed and are grayed out.
-S
D
N
CREEN
(OSD) M
ISPLAY
– 21 –
S
ENU
ETTINGS
Advertisement
Table of Contents
