Table of Contents
Advertisement
Bottom view
I
L
TEM
ABEL
1.
Tilt adjustor
2.
Ceiling support holes
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum
screw depth of 12 mm (0.47 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling
mount load capacity must exceed the weight of the installed equipment, and as an additional
precaution be capable of withstanding three times the weight of the equipment over a period of
60 seconds.
D
ESCRIPTION
Rotate adjuster lever to adjust angle position.
Contact your dealer for information on mounting the projector on a
ceiling
— 6 —
S
EE PAGE
15
Advertisement
Table of Contents
