Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the
projector. When enabled, the password must be entered after you power on the projector. (See
Navigating the OSD
OSD menus.)
Important:
Keep the password / Security card in a safe place.
1.
Press the MENU button to open the
OSD menu.
2.
Press the cursor ◄► button to move
to the Installation I menu.
3.
Press the cursor ▲▼ button to select
Advanced.
on page
21
and
Setting the OSD Language
on page
– 15 –
22
for help on using