Download Print this page

Acer P6600 User Manual

Hide thumbs

Advertisement

Acer Projector
P6600/F261/PM-WU01/P6500/F251/
PM-801/P6200/F211/PM-X01/
P6200S/F211S/PM-X01S Series
User's Guide

Advertisement

loading

  Related Manuals for Acer P6600

  Summary of Contents for Acer P6600

  • Page 1 Acer Projector P6600/F261/PM-WU01/P6500/F251/ PM-801/P6200/F211/PM-X01/ P6200S/F211S/PM-X01S Series User's Guide...
  • Page 2 Serial number: __________________________________ Date of purchase: _______________________________ Place of purchase: ______________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
  • Page 3 Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
  • Page 4 • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.
  • Page 5 Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •...
  • Page 6 Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.
  • Page 7 For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Dispose Properly.”...
  • Page 8: Precautions

    viii First things first Usage Notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
  • Page 9: Table Of Contents

    Information for your safety and comfort First things first viii Usage Notes viii Precautions viii Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout MHL (Mobile High-Definition Link) Control Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image...
  • Page 10 Language Acer LAN webpage management How to login in Home Control Panel Network Setting Alert Setting Logout Appendices Troubleshooting LED & Alarm Definition Listing How to install cable management Cleaning and replacing the dust filters Replacing the Lamp Ceiling Mount Installation...
  • Page 11: Introduction

    Full/4:3/16:9/L.Box aspect ratio supported • Enables projecting 3D content via DLP Link Technology: Blue-Ray 3D supported and nVidia 3DTV Play Ready • Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images • High brightness and contrast ratio •...
  • Page 12 Note: Functions vary depending on model definition.
  • Page 13: Package Overview

    Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable Security card User’s guide Quick start guide Carrying case Dust filters Remote control...
  • Page 14: Projector Overview

    Projector Overview Projector Outlook Front / upper side Description Description Dust filter cover Lamp cover Control panel Projection lens Power button Lens Cap Zoom lever 10 Tilt adjusting wheels Lens shift control ring 11 Ambient light sensor Focus ring 12 Remote control receiver...
  • Page 15 Right / Rear side 1819 DC 5V OUT Min-USB 1/MHL S-VIDEO AUDIO IN L 12V DC VGA IN 1 VGA OUT AUDIO IN AUDIO OUT Pb/Cb RS232 VGA IN 2 MIC-IN Pr/Cr AUDIO IN R HDBaseT VIDEO Description Description Power socket RS232 connector 5V DC output connector YPbPr/YCbCr input connector...
  • Page 16: Control Panel

    Control Panel SOURCE LAMP TEMP MENU RESYNC MODE Icon Function Description Four directional select to select items or make keys adjustments to your selection. • MENU Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu.
  • Page 17: Remote Control Layout

    Remote Control Layout SOURCE SOURCE MEDIA MEDIA SETUP MODE HIDE SETUP MODE HIDE ZOOM RATIO FREEZE ZOOM FREEZE Model No:E-26281 Model No:E-26171 E-26110 LASER MODULE : M-5.2-6.5x10-5.5x5.5 BONTECH ELECTRONICS(K.S) CO ., LTD . No. 2018, Zhonghuayuan west road, Yushan town,Kunshan city, China MC.JG811.009 MC.JK211.004 Icon...
  • Page 18 Icon Function Description Pre./Rewind No function. Enter/ Play/ No function. Pause Back/Stop No function. Next/Fast No function. forward KeyPad 0~9 Press "0~9" to input a password in the "Security" OSD. PgUp/PgDn For computer mode only. Use this button to select the next or previous page.
  • Page 19: Mhl (Mobile High-Definition Link) Control

    MHL (Mobile High-Definition Link) Control SOURCE MEDIA SETUP MODE HIDE FREEZE ZOOM Icon Component Description • MODE Press "MODE" button for one second to activate the MHL Control Mode. • To exit, press the "MODE" button again. SOURCE Press the "SOURCE" button to toggle between Navigation or Numeric mode.
  • Page 20: Getting Started

    Getting Started Connecting the Projector DVD player, Set-top Box, HDTV receiever DVD player Internet R B G D-Sub R B G S-Video output Smart Phone HDMI HDMI HDTV adapter D-Sub D-Sub Video output DC 5V OUT Min-USB 1/MHL S-VIDEO AUDIO IN L 12V DC VGA IN 1 VGA OUT...
  • Page 21 Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Functions vary depending on model definition. Note: USB cable needs powered extender if the length is over 5 m. Note: Some smartphones require a converter (supplied by smartphone maker) to enable the MHL function.
  • Page 22: Turning The Projector On/Off

    Turning the Projector On/Off Turning on the Projector Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing "Power" button on the control panel or remote control, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player ,etc.).
  • Page 23: Turning The Projector Off

    Turning the projector off To turn the projector off, press and hold the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.
  • Page 24: Adjusting The Projected Image

    Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel...
  • Page 25: How To Optimize Image Size And Distance

    How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • XGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 52"...
  • Page 26 • 1080p series If the projector is 3 m from the screen, good image quality is possible for image sizes between 60" and 96". Note: Remind as below figure, the space of 139 cm height is required when located at 3 m distance. Height: 139 cm from base to top of image...
  • Page 27 • WUXGA series If the projector is 3.0 m from the screen, good image quality is possible for image sizes between 62" and 99". Note: Remind as below figure, the space of 142 cm height is required when located at 3.0 m distance. Height: 142 cm from base to Height:...
  • Page 28: How To Get A Preferred Image Size By Adjusting Distance And Zoom

    How to get a preferred image size by adjusting distance and zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • XGA series To obtain an image size of 50" set the projector at a distance 1.4 m and 1.9 m from the screen.
  • Page 29 • 1080p series To obtain an image size of 60" set the projector at a distance 1.9 m and 3.0 m from the screen. 60" Desired image size Height: 87 cm from base to top of image 1.9 m 3.0 m Desired Distance Desired Image Size Distance (m)
  • Page 30 • WUXGA series To obtain an image size of 60" set the projector at a distance 1.8 m and 2.9 m from the screen. 60" Desired image size Height: 86 cm from base to top of image 1.8 m 2.9 m Desired Distance Desired Image Size Distance (m)
  • Page 31: How To Get A Preferred Image Position By Adjusting Lens Shift

    How to get a preferred image position by adjusting lens shift The projector is equipped with lens shift for adjusting the position of projected image up and down without requiring you to physically move the projector. Vertical Lens Shift ring Note: The figures shown in this section are for reference only not approximate value.
  • Page 32 The vertical image height can be adjusted between -6% and 21% of the image height. (The minimum vertical image offset is fixed at 5% of the image height above the centre of the projector lens.) Offset max=V x 21% Offset min=V x -6% FOCUS ZOOM LENS SHIFT...
  • Page 33: User Controls

    User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more .
  • Page 34 The new settings will be saved automatically upon exiting the menu. Push the MENU button anytime to exit the menu and return to the Acer welcome screen. Note: Functions vary depending on model definition.
  • Page 35: Onscreen Display (Osd) Menus

    Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control or control panel.
  • Page 36: Color

    Color The light sensor of LumiSense+ technology can intelligently LumiSense optimize the brightness and color saturation of projected image based on actual ambient light. The feature greatly enhances dark detail visibility and color saturation. • Off: For normal mode. (ambient light sensor is off) •...
  • Page 37: Color Temperature

    Tint Adjusts the color balance of red and green. • Press to increase the amount of green in the image. • Press to increase the amount of red in the image. Color Mode Use this function to choose CT1, CT2 (Native), CT3, User mode. Temperature R Gain Adjusts the red gain for color temperature optimization.
  • Page 38: Image

    Image Projection Mode • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection.
  • Page 39 H. Position • Press to move the image left. (Horizontal • position) Press to move the image right. V. Position • Press to move the image down. (Vertical position) • Press to move the image up. Frequency "Frequency" changes the projector's refresh rate to match the frequency of your computer’s graphics card.
  • Page 40: Setting

    OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Use this function to customize the startup screen. To capture the...
  • Page 41 Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is. • If losing this security card and number, please contact with an Acer service center.
  • Page 42: Management

    Lock to user startup screen Default Lock User Startup Screen is "Off". If lock user startup screen is "On", users cannot change startup screen anymore and avoid other users change that arbitrarily. Choose "Off" to unlock startup screen. Default is "Off". Choose "On" to enable LAN connection. <Note>...
  • Page 43: Audio

    Audio Volume • Press to decrease the volume. • Press to increase the volume. MIC Volume Adjust the volume from "MIC IN" connector. • Mute Choose "On" to mute the volume. • Choose "Off" to restore the volume. Power On/Off Volume Select this function to adjust the notification volume when turning the projector on/off.
  • Page 44: Language

    Choose "On" to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, 120Hz 3D capable graphics cards and HQFS format file or DVD with corresponding SW player. • Off: Turn off 3D mode. 3D Format If the 3D content is not displayed correctly, you can select a 3D format that suits the 3D content you are viewing and obtain the best result.
  • Page 45: Acer Lan Webpage Management

    How to login in Open browser and enter the Server IP address by 192.168.100.10 to find below homepage of acer LAN webpage management. A password is needed to login in before using. Select a user. Administrator is with high authority that can process more operations such as network setting and alert setting.
  • Page 46: Home

    Home Home page shows connection status and you can find three main functions listed, Control Panel, Networking Setting and Alert Setting. Note: Control Panel and Networking Setting are only for Administrator account. Control Panel Enduser can control and adjust projector setting value via this page.
  • Page 47: Network Setting

    Network Setting Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply". Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right away if projector has problem.
  • Page 48: Logout

    Logout After tap Logout, you will return to login page within 5 seconds. Note: Functions vary depending on model definition.
  • Page 49: Appendices

    Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem Solution No image appears • Connected as described in the "Getting Started"...
  • Page 50 Partial, scrolling • Press "RESYNC" on the control panel. or incorrectly • For an incorrectly displayed image: displayed image • Follow the steps for item 2 (above) to adjust (For notebooks) the resolution of your computer. • Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]...
  • Page 51 Image is stretched When you play a DVD encoded in anamorphic or 16:9 when displaying a aspect ratio you may need to adjust the following "widescreen" settings: DVD title • If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD.
  • Page 52: Osd Messages

    OSD Messages Condition Message Reminder Message • Fan Fail - the system fan is not working. • Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Please check the following message.
  • Page 53: Led & Alarm Definition Listing

    LED & Alarm Definition Listing LED Messages Lamp_LED Temp_LED Power LED Message Blue Input power plug Flash ON to Flash ON to Flash ON to OFF 100ms OFF 100ms OFF 100ms Standby Power button ON Lamp retry Quick Flashing Power off (Cooling state) Quick Flashing Power button OFF...
  • Page 54: How To Install Cable Management

    Plug in power cord and other cables you need. Install two support base and tighten the screws.(Illustration #1,2,3,4) Push the cable management. (Illustration #5) If you need to install Acer Dongle (WirlessHD-Kit/WirelessAndroid-Kit/WirelessCAST), follow the below steps: (A) Use a screwdriver to remove the screw from the cover.
  • Page 55: Cleaning And Replacing The Dust Filters

    Cleaning and replacing the dust filters Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: Turn the projector off.
  • Page 56: Replacing The Lamp

    Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!"...
  • Page 57 Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
  • Page 58: Ceiling Mount Installation

    Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structural ceiling member, and secure the ceiling mount base to the ceiling. Choose the length combination based on actual environment. (CM-01S doesn’t include Type 2 and Type 3.) Type 1 Type 2...
  • Page 59 Type 1: For the standard size use three bracket screws to mount the projector to the ceiling mount bracket. Type 2 and Type 3: Alternatively, for the larger size, use the sliding extensions for more supports. Type 1: Type 2: Type 3: Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat...
  • Page 60 Adjust the angle and positioning as necessary. 360° Screw Type B Washer Type Diameter (mm) Length (mm) Large Small SCREW SPEC. M4 x 25 mm 55.00 mm 85.00 mm...
  • Page 61: Specifications

    Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system ® Resolution • P6200/F211/PM-X01/P6200S/F211S/PM-X01S series: Native 1024 x 768 XGA resolution • P6500/F251/PM-801 series: 1920x1080 1080p resolution •...
  • Page 62 • USB DC 5V out x1 • DC 12V out x 1 • RJ45 LAN input x 1 • HDBaseT input x 1 (only for P6600/F261/PM-WU01 series) Standard package contents • AC power cord x1 • VGA cable x1 •...
  • Page 63: Compatibility Modes

    Compatibility modes A. VGA Analog VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 640x480 31.5 640x480 37.9 640x480 37.5 640x480 43.3 640x480 61.9 SVGA 800x600 35.1 800x600 37.9 800x600 48.1 800x600 46.9 800x600 53.7 800x600 77.4 1024x768 48.4 1024x768 56.5...
  • Page 64 WXGA 1280x768 47.8 1280x768 60.3 1280x768 68.6 1280x720 44.8 1280x720 92.9 1280x800 49.6 *1920x1200 1440x900 59.9 WSXGA+ 1680x1050 65.3 1920x1080 67.5 (1080P) 1366x768 47.7 WUXGA *1920x1200-RB 59.94 74.04 VGA Analog -Component Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720x480(1440x480) 59.94 (29.97) 15.7 576i...
  • Page 65 800x600 46.9 800x600 53.7 800x600 77.4 1024x768 48.4 1024x768 56.5 1024x768 60.0 1024x768 68.7 1024x768 99.0 SXGA 1152x864 63.8 1152x864 67.5 1152x864 77.1 1280x1024 64.0 1280x1024 77.0 1280x1024 80.0 1280x1024 91.1 QuadVGA 1280x960 60.0 1280x960 75.2 SXGA+ 1400x1050 65.3 UXGA 1600x1200 75.0 PowerBook G4...
  • Page 66 1366x768 47.7 WUXGA *1920x1200-RB 59.94 74.04 HDMI - Video Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720x480(1440x480) 59.94 (29.97) 15.7 576i 720x576(1440x576) 50(25) 15.6 480p 720x480 59.94 31.5 576p 720x576 31.6 720p 1280x720 45.0 720p 1280x720 37.5 1080i 1920x1080 60(30) 33.8 1080i...
  • Page 67 C. MHL Digital V.Frequency H.Frequency Modes Resolution [Hz] [KHz] *640x480 59.94/60 31.5 480i *720x480 (1440x480) 59.94/60 15.7 576i *720x576 (1440x576) 50(25) 15.6 480p *720x480 59.94/60 31.5 480p_2x *1440x480 59.94/60 31.5 576p *720x576 31.3 576p_2x *1440x576 31.3 720p *1280x720 59.94/60 45.0 720p *1280x720 37.5...
  • Page 68: Regulations And Safety Notices

    Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 69: Declaration Of Conformity For Eu Countries

    Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification...
  • Page 70: Declaration Of Conformity

    New Taipei City 221, Taiwan Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail: ru.jan@acer.com And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it...
  • Page 71 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the...