Acer F7200 Series User Manual page 23

4.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
devices.
5.
When the "Power Off? /Press
Power again" message appears,
press the POWER button. The
projector turns off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until the PWR LED stops flashing–indicating the projector has
cooled down.

DVI: Digital Visual Interface

HDMI: High-Definition Multimedia Interface
compatible

DisplayPort: Digital display interface

VGA 1 / 2: Analog RGB 1 / 2

BNC: Analog RGB (BNC connector)

Component Video: DVD input YCbCr / YPbPr , or

S-Video: Super video (Y/C separated)

Composite Video: Traditional composite video
— 14 —
HDTV input YPbPr