Display Image Settings Menu - Acer XL2330W User Manual

USING THE PROJECTOR
Display menu

Display image settings menu

otee:
Functions vary depending on model definition.
Display Mode
There are many factory presets optimized for various types of images.
‡ Presentation: This mode is suitable for showing in front of public in connection to the PC.
‡ Bright: Maximum brightness from PC input.
‡ HDR/HLG SIM.: Decodes and displays High Dynamic Range (HDR) and Hybrid Log Gamma(HLG)
content for the deepest blacks, brightest whites, and vivid cinematic color.
‡ Cinema: Provides the best colors for watching movies.
‡ Football: For football performance
User: Memorize user's settings.
‡
3D: To experience the 3D effect, you need to have 3D glasses, make sure your PC/portable device
‡
has a 120 Hz signal output quad buffered graphics card and have a 3D Player installed.
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.
Color
Adjust a video image from black and white to fully saturated color.
otee:
This menu option is only available if the input source is other than RGB.
Tint
Adjust the color balance of red and green.
otee: This menu option is only available if the input source is other than RGB.
Gamma
Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
‡ Film: For home theater.
Video: For video or TV source.
‡
‡ Graphics: For PC / Photo source.
‡ Standard(2.2): For standardized setting.
otee:
‡
These options are only available if the 3D mode function is disabled, the Wall Color setting is not set
to Blackboard, and the Display Mode setting is not set to DICOM SIM., HDR SIM. or HLG SIM.
‡
In 3D mode, user can only select 3D for Gamma setting.
‡
If the Wall Color setting is set to Blackboard, user can only select Blackboard for Gamma setting.
29
English