On/Off; Using Your Keypad; Focusing - ATN binox-thd User Manual

ON/OFF

To TURN ON the device press
and hold the POWER button until
you see the ATN splash screen.
To TURN OFF the device press
and hold the POWER button, until
the dialog box "Shut down the
device?" appears. Choose "Yes" to
turn off.
NOTE
Upon startup you must perform a NUC.

USING YOUR KEYPAD

The KEYPAD is programmed to be used in
two different ways:
• Short and Quick Taps — used for most
functions and to get around the menu;
• Press and Hold — designed to be used
in the following situations — ON/OFF, ZOOM,
SHORTCUT MENU.
NOTE
Using LEFT or RIGHT buttons in the menu,
lets you quickly Exit Shortcuts from any
position.

FOCUSING

DIOPTER ADJUSTMENT
By rotating the Diopter Adjustment Ring you will achieve optimal sharpness for
your vision. Look through the eyepiece while focusing on the interface on the screen.
Do not take the rubber cap off the objective lens.
NOTE
You should not need to re­adjust the Diopter Adjustment unless another
user with different vision than yourself will be using the device.
INTERPUPILLARY ADJUSTMENT
Depending on the distance between your eyes, you may adjust the individual eye-
pieces by moving each one horizontally.
7