Table of Contents
Related Manuals for Sunny SF-BH6510
Summary of Contents for Sunny SF-BH6510
-
Page 1: User Manual
100LB WEIGHT BENCH SET SF-BH6510 USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner’s manual for future reference. For Customer Service, please contact: support@sunnyhealthfitness.com... -
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS ....................1 IMPORTANT SAFETY INFORMATION ................2 EXPLODED DRAWING ....................3 COMPONENT PARTS LIST ..................4 PARTS LIST ........................5 HARDWARE PACKAGE ....................6 ASSEMBLY INSTRUCTIONS ................... 7-10 OPERATION & ADJUSTMENTS ................. 11 MAINTENANCE ......................12... -
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be assured if the equipment is assembled, maintained, and used properly. -
Page 4: Exploded Drawing
EXPLODED DRAWING... -
Page 5: Component Parts List
PACKAGE COMPONENTS... -
Page 6: Parts List
PARTS LIST Description Upright Beam Cross Brace Main Seat Support Diagonal Support Front Post Backrest Adjustment Bar Foam Roller Bar Backrest Support Leg Developer Seat Pad Backrest Board Bracket 4 3/8 x 3 3/8 Bracket 4 3/4 x 3 1/2 Weight Bar ○3/4 End Cap... -
Page 7: Hardware Package
HARDWARE PACKAGE... -
Page 8: Assembly Instructions
ASSEMBLY INSTRUCTIONS STEP 1: Attach the Cross Brace (No. 2) to the Upright Beams (No. 1) using 2 Brackets (No. 13), 4 Carriage Bolts (No. 24), 4 Washers (No. 34) and 4 Aircraft Nuts (No. 36). Tighten and secure with Spanner (No. 37). Insert the Adjustable Backrest Bar (No. -
Page 9: Main Seat Support
STEP 2: Attach the Main Seat Support (No. 3) to the Cross Brace (No. 2) using 2 Hex Bolts (No. 25), 1 Bracket (No. 12), 2 Washers (No. 34) and 2 Aircraft Nuts (No. 36). Slide the Front Post (No. 5) into the bottom end of the Main Seat Support (No. 3) and align the holes. -
Page 10: Backrest Adjustment Bar
STEP 3: IMPORTANT: The Backrest Supports (No. 8) must first be attached to the bar located on the Main Seat Support (No. 3) before continuing forward on this step. Slide the bottom ends (with holes), of the Backrest Supports (No. 8) onto each side of the bar located on the Main Seat Support (No. -
Page 11: Foam Roller Bar
STEP 4: Attach the Leg Developer (No. 9) to the Front Post (No. 5) using 1 Hex Bolt (No. 28), 1 Washer (No. 34) and 1 Aircraft Nut (No. 36). Tighten and secure with Spanner (No. 37). Insert the Foam Roller Bars (No. 7) through the holes located on the Leg Developer (No. -
Page 12: Operation & Adjustments
OPERATION & ADJUSTMENTS WEIGHT CAPACITY AND DIMENSION: 1. The maximum user weight on the bench is 250 lbs. 2. The maximum weight on the upright is 100 lbs. 3. The maximum weight capacity of the bench (including the user weight) is 350 lbs. 4. -
Page 13: Maintenance
MAINTENANCE IMPORTANT: Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that the equipment is maintained regularly. Any components found to be worn and/or damaged should be replaced before continuing use of the equipment.