Attaching Cables - Lexmark XM1140 User Manual

Additional printer setup

Attaching cables

CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this
product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone,
during a lightning storm.
Connect the printer to the computer using a USB cable or to the network using an Ethernet cable.
Make sure to match the following:
•
The USB symbol on the cable with the USB symbol on the printer
•
The appropriate Ethernet cable with the Ethernet port
Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area
shown while actively printing or scanning. Loss of data or a malfunction can occur.
Use the
1 Printer power cord
socket
2 Power switch
3 Ethernet port
4 EXT port
5 LINE port
6 USB printer port
7 Security slot
To
Connect the printer to a properly grounded electrical outlet.
Turn the printer on or off.
Connect the printer to an Ethernet network.
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and
if this connection method is supported in your country or region.
Note: Remove the adapter plug to access the port.
Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL
filter, or VoIP adapter, or any other adapter that allows you to access the telephone line
to send and receive faxes.
Connect the printer to a computer.
Attach a lock that will secure the printer in place.
33