Close Front Door - Lexmark XM1140 User Manual

Troubleshooting
Change [paper source] to [custom type name] load [orientation]
Try one or more of the following
•
Load the correct paper size and type in the tray, verify the paper size and type settings are specified
in the Paper menu on the printer control panel, and then select Finished changing paper. For
non‑touch‑screen printer models, press
•
Cancel the print job.
Change [paper source] to [paper size] load [orientation]
Try one or more of the following:
•
Load the correct paper size and type in the tray, verify the paper size and type settings are specified
in the Paper menu on the printer control panel, and then select Finished changing paper. For
non‑touch‑screen printer models, press
•
Cancel the print job.
Change [paper source] to [paper type] [paper size] load [orientation]
Try one or more of the following:
•
Load the correct paper size and type in the tray, verify the paper size and type settings are specified
in the Paper menu on the printer control panel, and then select Finished changing paper. For
non‑touch‑screen printer models, press
•
Cancel the print job.
Close flatbed cover and load originals if restarting job [2yy.xx]
From the printer control panel, try one or more of the following:
•
Select Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
•
Select Scan from flatbed to continue scanning from the scanner glass immediately after the last
successful scan job.
•
Select Finish job without further scanning to end the last successful scan job.
Note: This does not cancel the scan job. All successfully scanned pages will be processed further
for copying, faxing, or e-mailing.
•
Select Cancel job to clear the message and cancel the scan job.
•
For non‑touch‑screen printer models, press

Close front door

Close the front door of the printer.
to confirm.
to confirm.
to confirm.
to confirm.
217