Part Identification Chart - Pro-Form 831.21926.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included. If a part is missing, please call 1-888-533-1333.
M8 Locknut
M8 x 16mm
(67)–4
Washer (71)–2
M8 x 25mm
Washer (72)–2
M4 x 12mm M6 x 14mm M6 x 40mm M8 x 20mm
Screw (78)–4 Screw (77)–2 Screw (70)–5
Machine Screw
(89)–6
M8 x 60mm Bolt (75)–6
5