Propellers; Propeller Repair; Bravo Sterndrive Propeller Removal; Bravo One Models - Mercury 8.2 MAG Manual

Section 5 - Maintenance
2. Lubricate the driveshaft grease fittings by applying approximately 3–4 pumps of grease from a typical hand‑operated
grease gun.
b
a
a - Driveshaft grease fittings
b - Transom end grease fitting
c - Engine end grease fitting
Tube Ref No.
Extreme Grease

Propellers

Propeller Repair

Some damaged propellers can be repaired. Contact your authorized Mercury MerCruiser dealer.

Bravo Sterndrive Propeller Removal

Rotating propellers can cause serious injury or death. Never operate the boat out of the water with a propeller installed.
Before installing or removing a propeller, place the drive unit in neutral and engage the lanyard stop switch to prevent the
engine from starting. Place a block of wood between the propeller blade and the anti‑ventilation plate.

Bravo One Models

NOTE: Bravo One XR models do not use the tab washer.
1. If equipped, straighten the bent tabs of the tab washer on the propeller shaft.
b
a
Page 80
Description
Transom end grease fitting, engine end grease fitting,
!
c
a - Propeller
b - Tab washer
d
c - Drive sleeve adapter
d - Tab bent down
e
e - Propeller nut
4750
Where Used
driveshaft grease fittings
WARNING
c
a
17014
Part No.
8M0071842
90-8M0074352 OCTOBER 2012
eng