Guidelines For Disposal - Assa Abloy ANYKEY Programming And Operation Instructions

Biometrics door lock

Hide thumbs Also See for ANYKEY:

Table of Contents

Available languages

Close the inner fitting

Beware

The system will not function if the flat ribbon cable is

damaged. It also cannot be excluded that this could cause

damage to the system or that the batteries could be

prematurely drained.

When putting the housing back on do not trap the ribbon

cable. Place the ribbon cable correctly.

If the ribbon cable is trapped, dismantle the decorative

housing and check the ribbon cable for damage. Do not put

the system into operation if the ribbon cable is damaged.

Note

Take care that you do not scratch the door handle when you remove and put back the decorative

housing. Possibly use a cable protective tube when dismounting and reassembling the decorative

housing.

Guide the decorative housing over the door handle and the inner fitting.

Secure the decorative housing with the 2 screws.

Changing the batteries is now complete and the security fitting is ready for operation again.

5 . 3 Guidelines for disposal

Batteries should be disposed of either at commercial battery suppliers or at official collection

centres that have appropriate containers.

D00445

Care and maintenance

Seite 71

Table of Contents

Table of Contents

Do you have a question about the ANYKEY and is the answer not in the manual?