Set Date/Time - AT&T CLP99287 User Manual

Telephone settings
Handset and telephone base settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information. You can turn off
the date and time settings of the caller ID service and set the date and time
manually (see Use caller ID to automatically set date and time on page
48).
After a power failure or handset registration, the system prompts you to set
the date and time.
To set the date and time manually:
MENU
1. Press
2. Press or
CID
or
q
CALLER ID
scroll to Set date/time and then press SELECT.
3. Press or
CID
or
q
CALLER ID
select the month, then press NEXT, or enter the number
using the dialing keys.
4. Press or
CID
or
p
DIRECTORY
day, then press NEXT, or enter the number using the
dialing keys.
5. Press or
CID
or
q
CALLER ID
select the year, or enter the number using the dialing
keys, then press
6. Press or
CID
or
q
CALLER ID
select the hour, then press SAVE, or enter the number
using the dialing keys.
7. Press or
CID
or
q
CALLER ID
then press SAVE, or enter the number using the dialing keys.
in idle mode to enter the main menu.
on the handset, or press
 DIR
on the telephone base to
p
DIRECTORY
on the handset, or press
 DIR
on the telephone base to
p
DIRECTORY
on the handset, or press
 DIR
on the telephone base to select the
on the handset, or press
 DIR
on the telephone base to
p
DIRECTORY
NEXT
to move on to set the time.
on the handset, or press
 DIR
on the telephone base to
p
DIRECTORY
on the handset, or press
 DIR
on the telephone base to select the minute,
p
DIRECTORY
q
CALLER ID
42
Set date
09/30/15
MM/DD/YY
K S
BACK NEXT
Set time
05:41 PM
S
BACK
SAVE
SET DATE
02/01/15
MM/DD/YY
p
NEXT
BACK
q
SET TIME
05:41 PM
p
BACK SAVE
q
K