Interfaces <Interface> Ipv6 Ospfv3 Mtu-Ignore - Brocade Communications Systems 5600 Configuration Manual

interfaces <interface> ipv6 ospfv3 mtu-ignore
Disables maximum transmission unit (MTU) mismatch detection on an OSPFv3 interface.
Syntax
interface ipv6 ospfv3 [ process process-id instance-id instance-id ] mtu-ignore
set interfaces
interface ipv6 ospfv3 [ process process-id instance-id instance-id ] mtu-ignore
delete interfaces
interface ipv6 ospfv3 [ process process-id instance-id instance-id ]
show interfaces
Command Default
MTU mismatch detection is enabled by default.
Parameters
interface
The type of interface. For detailed keywords and arguments that can be specified as interface types, see
<interface> ipv6 ospfv3
process-id
The OSPFv3 process ID. Enter alphanumeric characters.
instance-id
The OSPFv3 instance ID. The range is from 0 to 255.
Modes
Configuration mode
Configuration Statement
interfaces interface {
ipv6 {
ospfv3 {
process process-id {
instance-id instance-id {
}
}
}
}
Usage Guidelines
Use this command to disable MTU mismatch detection on an OSPFv3 interface.
OSPFv3 sends the MTU of the interface in a database description packet. If the MTUs of OSPFv3 neighbors do not match,
they cannot form an OSPFv3 adjacency. MTU mismatch detection detects MTU mismatches and indicates them in the form
of a debug message.
MTU mismatch is an important troubleshooting feature. If MTU mismatch is not enabled, MTU mismatches can be detected
only by examining the configuration for both interfaces.
168
mtu-ignore.
mtu-ignore
}
OSPFv3 Interface Commands
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
interfaces
53-1004503-01