Hole Punch - Toshiba E-STUDIO2000AC Printing Manual

3.PRINTING FROM MAC OS APPLICATIONS
 Hole Punch
Select this to punch holes on printouts as they are ejected from the equipment.
Hole punch printing is only available when the Hole Punch Unit is installed.
Select [Print] from the [File] menu of the application.
1
Set the position of the holes in [Hole Punch] from the [Finishing] menu.
2

Hole Punch

 Off: Prints without hole punches.
 Long Edge Punch without rotation: Punches holes on the left side for a portrait document, or on the top for a
landscape document.
 Short Edge Punch without rotation: Punches holes on the top for a portrait document, or on the right for a
landscape document.
 Long Edge Punch with 180 degree rotation: Punches holes on the right side for a portrait document, or on
the bottom for a landscape document.
 Short Edge Punch with 180 degree rotation: Punches holes on the bottom for a portrait document, or on the
left for a landscape document.
Set other print functions, and then select this equipment from [Printer].
3
4 Click [Print] to send the job.
Setting the Layout and Finishing Options 117