Toshiba E-STUDIO2000AC Printing Manual page 148

4.OTHER PRINTING METHODS
 Stapling
This sets whether a print job is printed with staples. When the optional Finisher is installed it can be activated using
the following option.
Option Value
staple=0
staple=1
staple=2
staple=3
staple=4
staple=5
staple=6
staple=7
staple=8
staple=9
If this option is not specified, the printer's default value will be used.
Example: The command to staple in the upper left corner of a long edge feed portrait page is "lp -o staple=1
<filename>".
The value for the stapling position depends on the paper size, the paper feed direction, and the print direction. This
function is not available for all paper sizes and the users should refer to the Paper Preparation Guide for a list of
compatible paper sizes. In particular, A5, A6 and statement paper sizes will not work with this function.
Select [Tray 2] for stapling with the Finisher or the Saddle Stitch Finisher.
148 Printing From UNIX/Linux
Alternate Value
Stapling is turned off.
Staple in the top left corner of a portrait page and the upper right corner of
a landscape page.
Put two staples on the left side of a portrait page or the top side of a
landscape page printed on long-edge-feed paper. This command has no
effect when the paper is fed from the short-edge side.
Staple in the bottom left corner of a portrait page and the upper left corner
of a landscape page.
Staple in the top right corner of a portrait page and the bottom right
corner of a landscape page.
Put 2 staples on the right side of a portrait page or the bottom side of a
landscape page printed on long-edge-feed paper. This command has no
effect when the paper is fed from the short-edge side.
Staple in the bottom right corner of a portrait page and the lower left
corner of a landscape page.
Put 2 staples on the top side of a portrait page or the right side of a
landscape page printed on short-edge-feed large format (A3/Ledger)
paper. This command has no effect when the paper is fed from the long-
edge side or small paper size.
Put 2 staples on the bottom side of a portrait page or the left side of a
landscape page printed on short-edge-feed large format (A3/Ledger)
paper. This command has no effect when the paper is fed from the long-
edge side or small paper size.
Put 2 staples in the middle of a landscape page and fold the paper in half
vertically along the staple line (saddle stitching). This command works in
conjunction with booklet printing. This command has no effect when the
paper is fed from the long-edge side.
Description