Table of Contents
Advertisement
4.
Enter the Admin password and then press the Enter button.
(The default password is 999999.)
5.
Select Enable, and then press the Enter button.
6.
Press up or down on the operator panel to display Automatic Setup (PushButton),
and then press the Enter button.
7.
Select Yes, and then press the Enter button.
8.
Start WPS-PBC (push button) on the wireless terminal (computer, tablet, smartphone, etc.).
Manual connections
If the wireless terminal (computer, tablet, smartphone, etc.) does not support WPS-PBC
(push button), then you can input the machine's SSID and password into the wireless
terminal (computer, tablet, smartphone, etc.) to connect.
Follow the procedure below to connect.
1.
Turn on the printer.
2.
Press up or down on the operator panel to display Wireless(AP Mode) Setting,
and then press the Enter button.
3.
Enter the Admin password and then press the Enter button.
(The default password is 999999.)
4.
Select Enable, and then press the Enter button.
5.
Press up or down on the operator panel to display Manual Setup, and then press
the Enter button.
6.
Confirm the SSID and Password that are displayed on the printer.
7.
Input the priner's SSID and Password that were confirmed in step
wireless terminal (computer, tablet, smartphone, etc.).
Installing upgrades > 77
7
for the
Advertisement
Table of Contents
