Table of Contents
Advertisement
7.
Look into the printer to check whether any sheets of paper are visible on any part of
the belt unit.
Do not use any sharp or abrasive objects to separate sheets from
the belt. This may damage the belt surface.
(a)
To remove a sheet with its leading edge at the front of the belt (a), carefully lift
the sheet from the belt and pull it forwards into the internal drum cavity and
withdraw the sheet.
(b)
To remove a sheet from the central area of the belt (b), carefully separate the
sheet from the belt surface and withdraw the sheet.
c
b
a
CAUTION!
Troubleshooting > 84
d
Advertisement
Table of Contents
