Care And Maintenance; Specifications - La Crosse Technology WT-8112-U Instruction Manual

Solar wall clock
Hide thumbs Also See for WT-8112-U:
Table of Contents

Advertisement

CARE AND MAINTENANCE:

Avoid placing the unit in areas prone to vibration and
shock as these may cause damage.
Avoid areas where the unit can be exposed to sudden
changes in temperature, i.e. direct sunlight, extreme cold
and wet/moist conditions as these will lead to rapid
changes which reduce the accuracy of readings.
When cleaning the LCD and casing, use a soft damp
cloth only. Do not use solvents or scouring agents.
Do not submerge the unit into water.
Immediately remove all low powered batteries to avoid
leakage and damage. Replace only with new battery of
the recommended size.
Do not make any repairs to the unit. Please return it to
the original point of purchase. Opening and tampering
with the unit may invalidate the warranty.

SPECIFICATIONS:

Temperature measuring range
Indoor
:
-9.9°C to +59.9°C with 0.1°C resolution
(14.1°F to 139.8°F with 0.2°F resolution)
("OFL" displayed if outside this range)
Temperature checking interval
Indoor
:
every 60 seconds
Humidity measuring range
Indoor
:
20% to 95% with 1% resolution
("—" displayed if temperature is OFL; "19%"
displayed if below 20%, "96%" displayed is above
95%)
Power consumption
Alkaline rechargeable battery :
1 x AA, IEC LR6, 1.5V (included), rechargeable by solar cell
Rechargeable Alkaline battery life :
18 – 60 months, depending on usage
Primary Alkaline battery
:
1 x AA, IEC LR6, 1.5V battery (not included)
Primary Alkaline battery life :
about 24 months
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents