Month Setting; Date Setting; Weekday Setting - La Crosse Technology WT-8112-U Instruction Manual

1. The year digits will start flashing (only last 2 digits) on
LCD2. Select the desired year by use of the + key.
2. Press and release the SET key to switch to the "Month
Setting".

MONTH SETTING

1. The month digit on LCD2 will start flashing (Default
setting 1). Set the desired month by use of the + key.
2. Press and release the SET key to move to the mode

"Date Setting".

DATE SETTING
1. The digits for the date will start flashing on LCD2 (Default
setting 1). Set the desired date by use of the + key.
Note: The date can only be set in conjunction with the
selected month. For example, it is not possible to set the
date 30 if the month of February is selected.
2. Press and release the SET key to move to "Weekday
Setting".

WEEKDAY SETTING

1. The weekday symbols will be displayed on LCD2 in the
pre-set language and flashing. Set the desired weekday
by use of the + key.
2.
Press and release the SET key to enter the mode
"12/24h Time Format Setting".
12/24H TIME FORMAT SETTING
The time format can be display in 12h or 24h (Default setting
"24h").
1. The digits "12" or "24" will start flashing on LCD1. By
use of the + key select 12h or 24h time format display.
2. Press and release the SET key to enter the mode "ºC or
ºF Temperature Setting".
° C OR ° F TEMPERATURE
The temperature setting can be set to either to ºC or ºF (Default
setting °C).
23