Exit The Manual Setting Modes; To Deactivate The Alarm - La Crosse Technology WT-8112-U Instruction Manual

If the solar mode setting is OFF:
•
LCD will remain ON constantly.

EXIT THE MANUAL SETTING MODES

•
To return to the normal display mode from anywhere in
manual setting mode simply press the SNZ key anytime.
•
If no keys are pressed for at least 15 seconds in setting
mode, the radio-controlled solar clock will automatically
switch back to normal display mode.
ALARM
To enter into the alarm setting mode:
1. Hold the ALM key for 4 seconds. The hour digits start
flashing.
2. Press and release the + key to set the hour.
3. Press and release the ALM key to set the minutes. The
minute digits start flashing.
4. Press and release the + key to set the minutes. If the +
key is held, the unit will increase by 5
5. Press and release again the ALM key to exit the Alarm
setting mode or wait for 15 seconds automatic timeout.

TO DEACTIVATE THE ALARM:

The alarm will be automatically ON when the alarm time is set.
To deactivate the alarm (OFF), press and release once the
25
Alarm icon (((•))) (ON)