La Crosse Technology WT-8002U Quick Start Manual

DIGITAL WALL CLOCK
with Indoor Temp and Calendar
QUICK START GUIDE
Model: WT-8002U
DC:050818
Full Manual can be found under the Support Tab here: http://bit.ly/WT-8002U

DIGITAL WALL CLOCK OVERVIEW

AM or PM
Indicator
Time Display
Month | Date
Display
Weekday
Display
Mounting
Hole
Pull Out
Stand
Page | 2

POWER UP

1. Insert 1-AA battery into the clock.
2. Configure basic settings.

SETTINGS

Alarm &

Snooze

• Hold the SET button to enter the Settings Menu.
Indicators
• Press the +/HR or - ºF/ºC button to adjust values.
• Press the SET button to confirm and move to the
Indoor
Temperature
next item or exit.
Display
(°F/°C)
Settings Menu Order:
• 12/24 Hour Time Format
• Hour
• Minutes
Buttons
• Year
• Month
• Date
Note: The Weekday will set automatically as Year,
Month, and Date are set correctly.
Battery
FAHRENHEIT | CELSIUS
Compartment
• Press the - ºF/ºC button to select Fahrenheit or
Celsius temperature display.
Page | 3

ALARM SETTING

• Hold the ALM button to enter Alarm Settings.
• Press the +/HR or - ºF/ºC button to adjust values.
• Press the ALM button to confirm and move to the
next item or exit.

ACTIVATE | DEACTIVATE ALARM

• Press the ALM button to activate or deactivate the
alarm. The Alarm Indicator will display when active.
Note: The alarm will automatically be activated after
setting a new alarm time.
SNOOZE
• When the alarm sounds, press the SNZ button to
silence the alarm for 5 minutes. The Alarm and
Snooze Indicators will flash.
• Press any button except SNZ to stop the alarm for
24 hours.
• This is a crescendo alarm that will sound for 120
seconds if not deactivated.
Page | 4