Special Functions - BIXOLON SRP-500 Driver Installation Manual

6-2 Special Functions

This Windows driver supports the special functions as shown in the following table.
Select the "FontControl" character first and use the characters in the table to use the
special functions. Take care as this function is not for printing general texts.
Character
5 HT (0 x 0A) is output
6 LF (0 x 0A) is output
7 CR (0 x 0A) is output
a Open Drawer 2 (50ms drive pulse width)
b Open Drawer 2 (100ms drive pulse width)
c Open Drawer 2 (150ms drive pulse width)
d Open Drawer 2 (200ms drive pulse width)
e Open Drawer 2 (250ms drive pulse width)
f Open Drawer 2 (50ms drive pulse width) without feeding
g Cut Receipt (partial cut) without paper feeding
w Text is aligned left
x Text is centered
y Text is aligned right
A Open Drawer 1 (50ms drive pulse width)
B Open Drawer 1 (100ms drive pulse width)
C Open Drawer 1 (150ms drive pulse width)
D Open Drawer 1 (200ms drive pulse width)
E Open Drawer 1 (250ms drive pulse width)
F Open Drawer 1 (50ms drive pulse width) without feeding
P Cut Receipt (partial cut)
@ Printing the first NV bit image
# Printing the second NV bit image
$ Printing the third NV bit image
% Printing the fourth NV bit image
& Printing the fifth NV bit image
Rev. 2.08
Special Function
- 25 -
SRP-500