BIXOLON SRP-500 Driver Installation Manual page 23

3) If the user wants to open a cash-drawer prior to printing, tick the button named as
"Open Cash Drawer1" or "Open Cash Drawer2" in the "Start Doc" and then click the
"OK" button.
4) If the user wants to open a cash-drawer at the end of printing, tick the button named as
"Open Cash Drawer1" or "Open Cash Drawer2" in the "End Doc2" and then click the
"OK" button.
5) If the user wants to feed three lines at the end of printing, enter "3" in the "EndDoc2"
and click the "OK" button.
6) When downloading an image to the printer using the NV Image Tool, the image print
command is FS p n m (Hex: 1C 70 m n).
For more information on the hexadecimals that can be entered in "Start Doc", "Start Page",
"End Page" and "End Doc1", refer to the Control Commands Manual.
Rev. 2.08 - 23 -
SRP-500