Table of Contents
Advertisement
Feiyu Electronics Company
SW 1 and SW 2 : Switch Settings for FY31AP
a.
SW-1 Flight Modes
The FY31AP has 3 Flight modes controlled via SW-1. To select the
modes, use a free Receiver channel controlled via a 3 way-switch:
FY31AP FLIGHT MODES
SW-1 signal
output
Functional mode
Blue LED light
indicator
b.
SW-2 Autopilot Modes
FY31AP Autopilot Modes is controlled via SW-2.
IMPORTANT: The Autopilot Mode (SW-2) has controlling priority over the Flight Modes
(SW-1). If you wish to use the Flight Mode (SW-1), you must de-activate the Autopilot first.
SW-2 signal
output
Functional mode
Blue LED light
indicator
18 |
P a g e
900-1200us
Stabilization
deactivated
Stabilization Mode
Continuous
flashing
900-1200us
Return To Home
(RTH)
Continuous Double
flash each loop
1200-1800us
Auto
Stay on solid
1200-1800us Auto Stabilization Mode
1800-2100us Auto Navigation
1200-1800us
Autopilot
Deactivated
Flashing depends on
SW 1 Signal
900-1200us Return To Launch Mode
1200-1800us Cancel Mode
1800-2100us
1800-2100us
Auto
Navigation Mode
Single Flash
mode
900-1200us Deactivated
Mode
1800-2100us
Auto Circling (ACM)
Continuous flashing 3
times each loop
Auto Circling Mode
Advertisement
Table of Contents
