Table of Contents
Advertisement
Feiyu Electronics Company
FY31AP Electrical Connection and Diagram
a) Power supply
• The FY31AP operates between 5 to 6 volts input.
• FY31AP is powered via the Receiver connection (Channel 1).
• If your plane is Electric powered, the Receiver power may be supplied via
the ESC built-in Battery Elimination Circuit (BEC). However, we highly
recommend that a separate BEC with a 3A output.
• For Gas or Nitro powered planes, you will require a battery to power the
Receiver and FY31AP.
b) The FY31AP is connected to your RC Receiver
via a 6 wire cable. You need a minimum 6
Channel RC Receiver.
c) Note that the wire is arranged according to color :
Wire color
White
(bundled with red & black)
orange
green
yellow
brown
blue
d) Note that you need 2 free Receiver channels to control the FY31AP Flight Modes and
Autopilot Mode, using either a 3-position switch or your dial knobs.
3
16 |
P a g e
Receive channel
aileron
elevator
throttle
rudder
SW 1 - Any free channel controlled by
3-way switch or dial knob
SW 2 - Any free channel controlled by
3-way switch or dial knob
1
2
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Advertisement
Table of Contents
