Using The Audio Setup Menu; Analog Output - Philips DVP 7400S/98 User Manual

DVD Menu Options

Using the Audio setup menu

A
Press SYSTEM MENU on the remote
control.
The system setup menu appears.
AUDIO SETUP PAGE

ANALOG OUTPUT

DIGITAL AUDIO
HDMI AUDIO
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
B
Press to select { Audio Setup
Page }, then press OK.
C
Press to select an item, then press
to access.
Example: { Night Mode }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D
Use to select a setting and press
OK to confi rm.
Example: { On }
The setting is selected and setup is
complete.
E
To exit, press SYSTEM MENU.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
36
01-49 dvp7400_98_eng2.indd 36 01-49 dvp7400_98_eng2.indd 36
(continued)
Analog Output
This audio mode outputs the sound from
the front left and right speakers and
subwoofer. It downmixed all sound
surround format to standard two channel
(stereo).
A
In 'Audio Setup Page', use
highlight { Analog Output }, then press
.
{ Stereo }
Select this when output delivers sound
from only the two front speakers.
{ Multi-channel }
Select this to enable multi-channel
output. Dolby Pro Logic II will be
activated if a 2 channel recorded disc is
being played back.
B
Use keys to select a setting and
press OK to confi rm.
Tip:
– Multi-channel and downmixed stereo
output are not available simultaneously.
keys to
2006-10-12 3:08:38 PM 2006-10-12 3:08:38 PM