Table of Contents
Advertisement
DVD Menu Options
Using the Audio setup menu
A
In disc mode, press SETUP.
B
Press
select { AUDIO SETUP }.
AUDIO SETUP
DIGITAL OUT
DOWN SAMPLE
DOWNMIX
EXIT SETUP
Digital Out
The options included in 'Digital Out'
are: {ALL}, {PCM}.
A
In 'Audio Setup', press
{ DIGITAL OUT }, then press
{ ALL }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{ PCM }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
B
Press
to select a setting, then press
OK to confi rm your selection.
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
26
01-34 xDV435_436_75_eng3.indd 26
01-34 xDV435_436_75_eng3.indd 26
(continued)
Down Sample
You can enable and disable the digital
signal for better sound output quality.
A
In 'Audio Setup', press
{ DOWN SAMPLE }, then press
{ 48K }
Playback a disc recorded at the sampling
rate of 48kHz.
{ 96K }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
B
Press
OK to confi rm your selection.
Downmix
This option allows you to set the stereo
analog output of your DVD Player.
to highlight
.
A
In 'Audio Setup', press
{ DOWNMIX }, then press
{ LT/RT }
Select this option if your DVD Player is
connected to a Dolby decoder.
{ STEREO }
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
{ VSURR }
Allows the DVD player to use virtual
surround sound effects.
B
Press
OK to confi rm your selection.
to highlight
to select a setting, then press
to highlight
.
to select a setting, then press
2006-04-26 4:31:38 PM
2006-04-26 4:31:38 PM
.
Advertisement
Table of Contents
