Step 3: Selecting The Matching Color System - Philips DVP 7400S/98 User Manual

Getting Started
Step 3 : Selecting the
matching color system
The color system of the DVD player, disc
and TV should match in order for the
disc to play. Before changing the TV
system, determine the color system of
your TV.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PICTURE SETTING
ADV PICTURE
A
Press SYSTEM MENU.
B
Press repeatedly to select { Video
Setup Page }.
C
Press to select { TV Type }, then
press .
D
Use to select one of the options
below:
{ PAL }
Select this if the connected TV has the
PAL color system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{ NTSC }
Select this if the connected TV has the
NTSC color system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
20
01-49 dvp7400_98_eng2.indd 20 01-49 dvp7400_98_eng2.indd 20
(continued)
E
F
PAL
NTSC
MULTI
Select a setting and press OK.
Follow the instructions show on the
TV to confi rm the selection (if any).
CHANGING PAL TO NTSC
1. ENSURE THAT YOUR TV SYSTEM SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.
OK
Press to highlight { OK } and press
OK to confi rm.
Tips:
– Before changing the current TV color
setting, ensure that your TV supports the
'selected TV System'.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
CANCEL
2006-10-12 3:08:33 PM 2006-10-12 3:08:33 PM