Speaker Setup; Cd Upsampling; Night Mode; Lip Sync - Philips DVP 7400S/98 User Manual

DVD Menu Options

Speaker Setup

This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 22.

CD Upsampling

You can convert your music CD to a
higher sampling rate using complicated
digital signal for better sound quality. If
CD upsampling is activated, the DVD
player will automatically switch to stereo
mode.
A
In 'Audio Setup Page', use
highlight { CD Upsampling }, then press
.
{ Off }
Select this to disable the CD Upsampling
function.
{ 88.2 kHz (x2) }
Select this to convert the CD sampling
rate twice higher than the original.
{ 176.4 kHz (x4) }
Select this to convert the CD sampling
rate four times higher than the original.
B
Use keys to select a setting and
press OK to confi rm.
Tip:
– CD Upsampling feature is only applicable
in stereo output setting.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
38
01-49 dvp7400_98_eng2.indd 38 01-49 dvp7400_98_eng2.indd 38
(continued)

Night Mode

This mode optimises playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A
In 'Audio Setup Page', use
highlight { Night Mode }, then press
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
keys to
dynamic range.
B
Use
OK to confi rm.

Lip Sync

This allows you to adjust the audio delay
(ms) with respect to the video output for
the lip synchronization.
A
In 'Audio Setup Page', use
highlight { Lip Sync }, then press
Use
options; { 0ms }
B
Press OK to confi rm.
keys to
to select a setting and press
keys to
.
to adjust the following
{ 200ms }
2006-10-12 3:08:39 PM 2006-10-12 3:08:39 PM
.