Table of Contents
Advertisement
Playback Features
Starting disc playback
A
Press SELECT on the remote control
until 'DVD' is lighted on the remote
control display (see remote control, page
18).
B
Turn on the TV to the correct
programme number for the DVD player
(e.g. 'EXT', '0', 'AV').
Press STANDBY-ON 2 to turn on
C
the DVD player.
D
Press OPEN CLOSE on the front of
the DVD player.
E
Place a disc into the disc tray with the
label facing up, then press OPEN
CLOSE.
For double-sided discs, load the side
which you want to play facing up.
F
Playback may start automatically.
If not, press PLAY
If a disc menu appears on the TV, see
page 25 'Using the Disc Menu'.
If the child lock was activated for the
inserted disc, you have to enter your six-
digit password (see page 44).
For more playback features, see pages
24~32.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
24
01-49 dvp7400_98_eng2.indd 24
01-49 dvp7400_98_eng2.indd 24
A
B
C
.
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
During playback, press PAUSE Å to
pause playback and display a still picture.
Sound will be muted.
Press PAUSE Åagain to select the next
picture frame.
To resume normal playback, press
PLAY
again.
Selecting title/chapter/track
Press . / > or use alphanumeric
keypad (0-9) go to the previous or next
title/chapter/track.
The playback skips to the selected
title/chapter/track.
During repeat playback of a title/chapter/
track, pressing . / > will replay the
same title/chapter/track.
Stopping playback
Press STOP
.
Tips:
– Screen saver will start automatically if the
disc playback is stopped for 15 minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for 30 minutes after the disc has
stopped playing.
2006-10-12 3:08:36 PM
2006-10-12 3:08:36 PM
Advertisement
Table of Contents
Troubleshooting
