Connecting To An Stereo System; Stereo System Has Dolby Pro Logic Or Right/Left Audio In Sockets; Connecting To A Digital Av Receiver; Receiver Has A Pcm, Dolby Digital Or Mpeg Decoder - Philips DVP 7400S/98 User Manual

Optional connections
Connecting to an stereo
system
STEREO
SCAN MODE
Pr Pb Y
HDMI
INTERLACE
COMPONENT
PROGRESSIVE
VIDEO S-VIDEO
VIDEO OUT
Stereo system has Dolby Pro Logic
or right/ left Audio In sockets
A
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO or
COMPONENT VIDEO IN) depending on
the options available on your TV.
B
Switch the SCAN MODE selector to
INTERLACE for CVBS or S-VIDEO
connection.
C
Switch the SCAN MODE selector to
PROGRESSIVE for COMPONENT
VIDEO connection with a Progressive
Scan TV.
D
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) sockets of
the DVD Player to the corresponding
AUDIO IN sockets on the stereo system
(cable supplied).
Tip:
– For optimum stereo sound quality, connect
Left and Right channel from the Multi-
channel output and set {Analog Output} to
{Stereo}, see page 36.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
14
01-49 dvp7400_98_eng2.indd 14 01-49 dvp7400_98_eng2.indd 14
(continued)
AUDIO
IN
CENTER
PCM / DIGITAL/
L L
DTS / MPEG
R R
SUB WOOFER
COAXIAL OPTICAL MAIN
MIXED 2CH
6CH DISCRETE
DIGITAL OUT AUDIO OUT
A
B
C
Connecting to a digital AV
receiver
Receiver
SCAN MODE
Pr Pb Y
HDMI
INTERLACE
COMPONENT
PROGRESSIVE
VIDEO
S-VIDEO
VIDEO OUT
Receiver has a PCM, Dolby Digital
or MPEG decoder
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO or
COMPONENT VIDEO IN) depending on
the options available on your TV.
Connect the COAXIAL or OPTICAL
jack of the DVD player to the
corresponding Digital Audio In socket on
your receiver (cable not supplied).
Set the DVD player's {Digital Output} to
{PCM-Only} or {All} depending on the
capabilities of your receiver (see page 37
{Digital Output}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
OPTICAL
AUDIO
IN
COAXIAL
OR
PCM / DIGITAL/
L L
DTS / MPEG
R R
COAXIAL OPTICAL MIXED 2CH M
DIGITAL OUT AUD
2006-10-12 3:08:31 PM 2006-10-12 3:08:31 PM